Professional microprocessor charger with built-in balancer, for both nickel and lithium battery packs, enabling safe loading. The charger has a display indicating the operating status. The balancer has five sockets to connect lithium batteries consisting of up to six cells.
DOUBLE POWER AC / DC!
The charger supports the following packages: NiCd / NiMH / LiPo / LiFe / LiIon / Pb
The maximum number of cells: NiCd / NiMH is 1-15, LiPo / Li-ion / LiFe 1-6, Pb 2-20 V
The charging current is 0.1 to 8.0 A and the discharge current is 0.1 to 2.0 A.
In addition to the charging and discharging functions, the charger has the function of measuring the resistance of the battery, checking the charge status of individual protection cells against polarity reversal, and many more.
The charger has a display indicating the operating status. Has a program for each of the batteries. The expanded soft also allows you to set the charging parameters yourself.
In addition, the charger has adapters that allow you to charge many types of batteries.
Operating voltage range: AC 100-240V or DC 11-18V
Circuit power: Max. Charge power 80 Watts / Max. Discharge power 10 Watts
Charge current range: 0.1-8.0A
Discharge current range: 0.1-2.0A
Current drain for balancing: 460mA / cell
Supported battery pack cell count: 1-15 NiCd/NiMH, 1-6 Li-Po/Li-ion/Li-Fe, Pb 2-20V
* Optimized operating software
I6AC+ features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user’s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimized the trouble. All the settings can be configured by users!
* Internal Independent lithium battery balancer
I6AC+ employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
* Balancing individual cells battery discharging
During the process of discharging , I6AC+ can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
* Adaptable to various type of lithium battery
I6AC+ is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
* Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, „fast“ charge reduce the duration of charging, whereas „store“ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
* Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery’s voltage exceeds the threshold, the process will be terminated automatically.
* Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; It is useful for the NiMH battery of low impedance and capacity in the „AUTO“ charging mode.
* Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
* Temperature theshold
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. *The function is available by connecting optional temperature probe, which is not included in our package.
* Processing time limit
You can also limit the maximum process time to avoid any possible defect.
* Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
* Data store/load
The maximum five batteryies’data can be stored for users’convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
NOTE! Please read entire operating manual completely and attentively before using this product!
NOTICE! The charger is covered only by starting warranty.
· Please use this charger under supervision.
· Please place the charger in a dry environment and keep it away from fire.
· Please don’t tightly pull and drag the power cord or replace it, or else the fire/electric shock will be coused.
· Please don’t touch the charger and power with wet hands or it will bring in electrick shock.
· To extend the working life of the charger, please remove it from power once charging is finished.
· Children must be watched by adults to use the charger.
Još nema komentara.